Radium Engineering

Radium Engineering Dual Catch Can Kit | 2008-2015 Mitsubishi Evolution X (20-0108-08)

  • Sale
  • $379.95
  • Regular price $399.95


Dual Oil Catch Can Kit by Radium Engineering

The Dual Catch Can Kit features both the crankcase catch can kit and PCV catch can kit merged into one. The Crankcase Catch Can Kits install immediately behind the LH headlight and plumbs in-line with the crankcase vent hose. This is the hose that connects from the port on the valve cover to the turbo air intake pipe. The PCV Catch Can Kit installs immediately behind the RH headlight and plumbs in-line with the PCV hose.

During low engine loads, the crankcase vent hose experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience vacuum and would normally be drawing unwanted crankcase vapors, unspent fuel, and oil sludge into the air filter intake pipe, turbocharger compressor, etc. For instance. if you are finding oil accumulation stuck in the intercooler, this catch can is a necessity. Oil coating the inside of the intercooler will lower the thermal efficiency of the intercooler.

When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV "check" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hose will experience "metered" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. Note: Because Radium catch cans are pressure sealed, they are great for boosted applications as well so connecting to the intake manifold is permitted and will withstand any boost level.

Features

  • PCV Can Installs Behind RH Headlight
  • Crankcase Can Installs Behind LH Headlight
  • PCV Can Plumbs In-Line w/ PCV Hose
  • Crankcase Can Plumbs In-Line w/ Crankcase Vent Hose
  • Collects Unwanted Crankcase Vapor, Unspent Fuel and Oil Sludge.

Please Note: These kits were designed with the OEM intake system. If an aftermarket intake is installed, consider purchasing 20-0300 Alternate Location Mount.

Applications

  • 2008 - 2015 Mitsubishi Evolution X

What's In The Box?

  • 1 - PCV Side Catch Can
  • 1 - Crankcase Side Catch Can
  • 1 - PCV Side Plumbing
  • 1 - Crankcase Side Plumbinh
  • 1 - PCV Side Mounting Bracket
  • 1 - Crankcase Side Mounting Bracket
  • All Necessary Fittings & Hardware

References

Warranty

  • Manufacturer's Warranty