Crankcase Oil Catch Can Kit by Radium Engineering
The Crankcase Catch Can Kits (shown below) install immediately behind the LH headlight and plumbs in-line with the crankcase vent hose. This is the hose that connects from the port on the valve cover to the turbo air intake pipe.
During low engine loads, this crankcase vent hose experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience vacuum and would normally be drawing unwanted crankcase vapors, unspent fuel, and oil sludge into the air filter intake pipe, turbocharger compressor, etc. For instance. if you are finding oil accumulation stuck in the intercooler, this catch can is a necessity. Oil coating the inside of the intercooler will lower the thermal efficiency of the intercooler.
- Installs Behind LH Headlight
- Plumbs In-Line w/ Crankcase Vent Hose
- Collects Unwanted Crankcase Vapor, Unspent Fuel and Oil Sludge.
Please Note: These kits were designed with the OEM intake system. If an aftermarket intake is installed, consider purchasing 20-0300 Alternate Location Mount.
- 2008 - 2009 Mitsubishi Evolution X
What's In The Box?
- 1 - Oil Catch Can
- 1 - Piece of Hose
- 1 - Mounting Bracket
- Necessary Fittings & Hardware
- Manufacturer's Warranty