Mitsubishi Evo 8/9 LP2 Lower Intercooler Pipe by ETS
The lower intercooler piping is possibly the biggest restriction in the intercooler system on the Evo. Just by installing the ETS Lower Intercooler Pipe you will gain 12hp in power and reduced lag time on initial spool up and improved transient response between gears. This piping can be installed by itself without a retune and allows you to upgrade the upper intercooler piping down the road. Our piping kit fit perfectly with both the stock and ETS intercoolers.
The ETS LP2 Lower Pipe for the Mitsubishi Evo 8 and 9 is the most powerful pipe on the market today. This pipe is the culmination of over 2 years of research and development, improving upon the average 7-9hp gains commonly found with most lower pipes on the market. Boasting a max hp increase of 12hp!
The ETS LP2 Lower Pipe delivers more power throughout a wider power band than any other pipe we tested including our previous ETS lower pipe.
The Key to this increased power output of the ETS LP2 Lower Pipe is the smooth and fast transition from 1.8" to 2.5" at the turbo outlet. In the past there were two main schools of thought on lower pipe design.
- Full Mandrel Bent 2.5" Piping
- Stainless Steel T-Bolt Clamps
- 4-Ply Reinforced Silicone Couplers
- Short Route: Two feet shorter than stock when combined with the upper piping
- Lower piping flows over 20% more than stock
Please Note: California Residents - Prop 65 Warning
- 2003 - 2006 Mitsubishi Evolution 8/9
What's In The Box?
- 1 - ETS LP2 Lower IC Pipe
- 1 - Coupler
- 2 - Clamps
- Manufacturer Standard Warranty